Development of Mechatronics Trainers as Practical Learning Media for Electrical Engineering Vocational Education Students
Abstract
This study aims to produce a mechatronics trainer and job sheet product as a practical learning medium in mechatronics courses, as well as to determine the feasibility level of mechatronics trainer and job sheet products. The research method used is development research. The development used adopts the ADDIE model which consists of five stages, namely analyze, design, development, implementation, and evaluation. Data collection techniques used include interviews, observations, and questionnaires. Testing the feasibility level of the mechatronics trainer involving four media experts and four material experts, as well as users were carried out by students of the sixth semester of the 2018 electrical engineering vocational education study program. The data analysis technique used is descriptive qualitative and quantitative analysis. The results obtained for the media expert feasibility test score of 93.63 with a very decent category, for the material expert score, obtained 90.76 including the very feasible category, and the results obtained from users with a score of 88.76 so it can be stated that mechatronics trainers and job sheets can be used as media mechatronic practice learning in the electrical engineering vocational education study program
Keywords: development, mechatronics, practice, media, learning
Full Text:
PDFReferences
Anonim, 2002. Curriculum Mechatronics General, part 1, Festo Industry.
Aris, Z. M. 2007. Pengajaran Mekatronika Menggunakan Gambar Animasi Makromedia Flash di Jurusan Teknik Mesin. Seminar Nasional Aplikasi Teknologi Informasi 2007 (SNATI 2007) ISSN: 1907-5022. Yogyakarta, 16 Juni 2007. Hal 9-12.
Benny A. Prasetyo, Dyah Lestari, Siti Sendari. 2017. Pengembangan Bahan Ajar Mekatronika Untuk Program Studi D3 Teknik Elektronika Fakultas Teknik Universitas Negeri Malang. http://journal2.um.ac.id/index.php/tekno | ISSN 1693-8739. TEKNO Vol. 27 Issue 2, p162-169. Jurnal Teknologi Elektro dan Kejuruan.
Daryanto. 2013. Menyusun Modul Bahan Ajar untuk Persiapan Guru dalam Mengajar. Yogyakarta. Gava Media.
Depdiknas. 2003. Undang-undang RI No. 20 Tahun 2003. Tentang sistem pendidikan nasional.
Djamarah & Zain. 2006. Strategi belajar mengajar. Jakarta: Rineka Cipta.
H. Prabowo and F. Arifin. 2018. Pengembangan Media Pembelajaran Kendali Fuzzy Logic Berbasis Arduino Nano Pada Mata Kuliah Praktik Sistem Kendali Cerdas. Elinvo (Electronics, Informatics, Vocat. Educ., vol. 3, no. 1, pp. 39–45, 2018.
Hariyanto, D. Aribowo, and M. Fatkhurrokhman. 2020. Pengembangan Media Pembelajaran Trainer Kit Pengendali Motor 3 Phase Pada Mata Pelajaran Instalasi Motor Listrik Di SMKN 4 Kota Serang. JUPITER (Jurnal Pendidik. Teknik. Elektro), vol. 05, pp. 1–7, 2020.
J. W. Adji, D. Aribowo, and M. Fatkhurrohman. 2020. Media Pembelajaran Trainer Kit Elektropneumatik pada Mata Pelajaran Sistem Pengendali Elektronik di SMK Negeri. JUPITER (Jurnal Pendiikan Tek. Elektro), vol. 05, pp. 14–21, 202
Lase, D. 2019. Pendidikan di Era Revolusi Industri 4.0. SUNDERMANN: Jurnal Ilmiah Teologi, Pendidikan, Sains, Humaniora Dan Kebudayaan, 1 (1), 28–43.
Mardapi, D. 2008. Teknik Penyusunan Instrumen Tes dan Nontes. Jogjakarta: Mitra Cendikia
Nur, M. 2005. Pengajaran Langsung. Surabaya: University Press
Ogata, Katsuhiko. 2002. Modern Control Engineering. New Jersey: Prentice-Hall, Inc.
Prapaskah. Y. A, Permata. E, M. Fatkhurrokhman. 2020. Trainer Kit Pneumatik Sebagai media Pembelajaran pada Mata Kuliah Mekatronika di Program Studi Pendidikan Vokasional Teknik Elektro UNTIRTA. Skripsi Program Studi Pendidikan Vokasional Teknik Elektro FKIP Universitas Sultan Ageng Tirtayasa. Kota Serang-Banten. Tidak Terbitkan.
Rizki, B. C. 2014. Pengembangan Trainer Intalasi penerangan Sebagai Media Pembelajaran Instalasi Listrik Program keterampilan Elektronika di MAN Kendal. http://journal.unnes.ac.id/sju/index.php/eduel. Edu Elektrika Journal. EDUEL 3 (2) (2014). ISSN 2252-7095. Hal. 1-8.
Sadiman, Arif S., Rahardjo, R., Haryono, Anung., Rahardjito. 2011. Pengertian, Pengembangan dan Pemanfaatannya. Jakarta: Raja Grafindo.
Sudira. P, Aini. S. N. 2016. Pengaruh Strategi Pembelajaran, Gaya Belajar, Sarana Praktik, dan Media terhadap hasil Belajar Patiseri SMK se-Gerbang Kertasusila. Jurnal Pendidikan Vokasi. 5 (1). P.88-102.
Sugiyono. 2018. Metode Penelitian Kuantitatif, Kualitatif, dan R&D. Bandung: Alfabeta.
Tohir, M. 2020. Buku Panduan Merdeka Belajar-Kampus Merdeka. University Press.
Wahyudi, Hendra Jaya, Edy Sabara. 2020. Pengembangan Media Trainer Robotika Berbasis Mikrokontroler pada Program Studi Pendidikan Vokasional Mekatronika FT-UNM. Pendidikan Teknologi dan Kejuruan. Pascasarjana Universitas Negeri Makassar.
Refbacks
- There are currently no refbacks.
Copyright (c) 2021
Copyright of the article is reserved by the author(s). Published by the Physics Education Study Program, Faculty of Teacher Training and Education, Universitas Lampung in Collaboration with the Physical Society of Indonesia (since 2019). This article is an open-access article under the Creative Commons non-commercial-share-alike 4.0 International License (CC BY-NC-SA 4.0) license.
