Project-Based Learning Strategy for Enhancing Manufacturing Drawing Techniques Competency Using Cad

Rahmadani Rahmadani, Erik Fernandes, Zulfadli Zulfadli

Abstract


This study aims to evaluate the implementation of the Project-Based Learning (PjBL) model in improving the skills and understanding of students in the Diploma-3 Mechanical Engineering Program. The method used is Classroom Action Research (CAR), conducted in three cycles, each consisting of planning, action, observation, and reflection stages. Each cycle was followed by two face-to-face meetings. Data was collected through tests and analyzed descriptively to measure the improvement in students' learning outcomes. The research findings indicate that the implementation of PjBL is effective in enhancing technical skills, understanding of the material, and collaborative skills among students. The achievement of success indicators improved from 56.67% in Cycle I to 86.67% in Cycle III. PjBL has proven to create more applicable and interactive learning experiences, increase student motivation, and prepare them to face industry challenges. This study concludes that the PjBL model can be more widely applied in vocational education to improve students' practical skills and prepare them to meet the growing demands of the industry.


Keywords: D3 Mechanical Engineering Program, Project-Based Learning (PjBL), Skill Improvement


Full Text:

PDF

References


Adi, N. H., Riyanda, A. R., Nadia, H., Maulana, F., Ambiyar, A., Verawardina, U., & Lapisa, R. (2023). Model Pembelajaran Kejuruan.

Ali, A. S. H. R., Ali, A. M. S., Amin, Y. W. R., & Ali, S. H. R. (2024). The Important Role of GD&T in Mechanical Drawing, Design and Manufacturing for Students of Engineering Institutes. 2024-01–2052. https://doi.org/10.4271/2024-01-2052

Arikunto, S. (2010). Prosedur penelitian suatu pendekatan praktek. Rineka Cipta.

Basri, I. Y., Giatman, M., Muskhir, M., Effendi, H., Ambiyar, A., Elfina, E., & Yuliardi, T. P. (2023). Improving the Quality of Learning Through Project Based Learning (PjBL) With the STEAM Approach in CAD Courses in the Department of Automotive Engineering Universitas Negeri Padang. INVOTEK: Jurnal Inovasi Vokasional Dan Teknologi, 23(1), 1–10. https://doi.org/10.24036/invotek.v23i1.1068

Deokar, S., Pathak, A., & Warghane, R. (2019). Computer Aided Design and Manufacturing. Journal of Emerging Technologies and Innovative Research, 6(4), 592–597.

Durakbasa, M. N., & Osanna, P. H. (2011). Intelligent Design and Metrology for Higher Quality, Accuracy and Improving Production Efficiency. Acta Mechanica Slovaca, 15(1), 6–11. https://doi.org/10.21496/ams.2011.001

Ersi Ersi, Ahmad Mulyadi, Dwi Noviani, & Hilmin Hilmin. (2023). Pengembangan Kurikulum Pendidikan dan Globalisasi. Concept: Journal of Social Humanities and Education, 2(4), 95–106. https://doi.org/10.55606/concept.v2i4.771

Febrianti, D., & Hamimi, E. (2024). Enhancing creativity through PjBL-STEAM equipped biogeochemical cycle educational kit on ecosystem materials in junior high school. Research and Development in Education (RaDEn), 4(2), 845–862. https://doi.org/10.22219/raden.v4i2.35186

Fitriani, S. (2024). Teaching Factory and Technopark as a Driver of Enterpreneurship and Innovation: A Lesson Case Study From Indonesian’s Vocational Schools. AL-ISHLAH: Jurnal Pendidikan, 16(3). https://doi.org/10.35445/alishlah.v16i3.5247

Gamar, M. M., Al Faruq, M. S., & Lina, L. (2018). Challenging the Indonesian Primary Education in Industrial Revolution 4.0 Era. Proceedings of the 3rd International Conference on Educational Management and Administration (CoEMA 2018). 3rd International Conference on Educational Management and Administration (CoEMA 2018), Malang, Indonesia. https://doi.org/10.2991/coema-18.2018.12

Lestari, A., Tersta, F. W., Firman, F., & Sofyan, S. (2024). Implementation of Project-Based Learning Through the STEM (Science, Technology, Engineering and Math). International Journal of Education, Culture, and Society, 2(3), 175–186. https://doi.org/10.58578/ijecs.v2i3.3410

Lockhart, S. (2011). Tutorial Guide to AutoCAD 2012. https://www.amazon.com/Tutorial-Guide-AutoCAD-Shawna-Lockhart/dp/1585036439

Mabrur, M., Huda, N., & Utami, S. (2024). The Effectiveness of Project-Based Learning Assisted by Digital Technology to Improve Problem-Solving and Critical Thinking Skills in SMKN 3 Sampang Students. Jurnal Indonesia Sosial Sains, 5(09), 2450–2457. https://doi.org/10.59141/jiss.v5i10.1468

Mudriadi, W., Yahya, M., & Supriadi. (2024). Effectiveness of Project-oriented Problem-based Learning (POPBL) in Manufacturing Product Design for Vocational Higher Education. Asian Journal of Education and Social Studies, 50(2), 31–42. https://doi.org/10.9734/ajess/2024/v50i21256

Nasution, R., K, A., & Fernanda, Y. (2024). Implementation of experiential learning method in mechanical drawing course to enhance student understanding through real projects. Journal of Engineering Researcher and Lecturer, 3(2), 109–126. https://doi.org/10.58712/jerel.v3i2.127

Novianti, A. G., & Asmara, A. (2023). The Development of Digital Technology and Its Impact on Indonesia’s Economic Growth. International Journal of Research and Review, 10(9), 297–319. https://doi.org/10.52403/ijrr.20230932

Permana, P. D., Larasati, Lady, Hati, C. M. P., & Amrina, D. H. (2024). The Influence of Education and Training on Labor Productivity in Indonesia. Journal of International Conference Proceedings, 6(6), 369–379. https://doi.org/10.32535/jicp.v6i6.2705

Priambudi, T. (2022). Pembelajaran Inovatif Abad 21 pada Materi Menggambar Denah Rumah Tinggal Menggunakan Program AutoCAD dengan Model Project Based Learning (PjBL) di SMK Negeri 1 Adiwerna Kabupaten Tegal. Cakrawala: Jurnal Pendidikan, 288–297. https://doi.org/10.24905/cakrawala.vi0.194

Raida, S. A., & Ardianti, S. D. (2024). PjBL online in ecological learning to improve student’s problem-solving skills. THABIEA : JOURNAL OF NATURAL SCIENCE TEACHING, 7(1), 108. https://doi.org/10.21043/thabiea.v7i1.20193

Rendón, A., & Martínez, F. (2024). Impact of project-based learning on conceptual achievements and motivation of technology students in electricity. World Journal of Advanced Engineering Technology and Sciences, 12(2), 001–008. https://doi.org/10.30574/wjaets.2024.12.2.0262

Sağocak, A. M., Yilmaz, E., & Karahan, N. (2013). Knowledge, Skills And Creativity In Vocational And Technical Education. 4(1), 13–21.

Samingan, M., Prakoso, L. Y., & Suwito, S. (2024). Indonesia’s Digital Economic Policy To Increase Economic Resilience. International Journal Of Humanities Education and Social Sciences (IJHESS), 3(6). https://doi.org/10.55227/ijhess.v3i6.873

Setiawan, A. B. (2020). A Study on the Potential of the Development of Software Applications and Digital Content Industrial Ecosystem in Indonesia. Jurnal Penelitian Pos Dan Informatika, 10(2), 145. https://doi.org/10.17933/jppi.2020.100205

Siregar, E. H., & Hasibuan, W. K. (2024). Pengaruh Pengembangan Sumber Daya Manusia Dan Pendidikan Dalam Rangka Meningkatkan Pertumbuhan Ekonomi. Mutiara : Jurnal Penelitian Dan Karya Ilmiah, 2(1), 312–324. https://doi.org/10.59059/mutiara.v2i1.970

Soomro, S. A., Nanjappan, V., Casakin, H., & Georgiev, G. V. (2024). Fostering technical skills and creativity in the digital fabrication spaces: An open-ended prototyping approach. International Journal of Technology and Design Education. https://doi.org/10.1007/s10798-024-09940-3

Sudarmanto, B. A., & Salim, A. (2019). Makanan tradisional, bahasa, dan revolusi industri 4.0. Prosiding Seminar Nasional Program Pascasarjana Universitas PGRI Palembang.

Sukamta, S., Florentinus, T. S., Ekosiswoyo, R., & Martono, S. (2018). Project Based Learning Enhances Student Quality in Vocational Education. Proceedings of the International Conference on Science and Education and Technology 2018 (ISET 2018). Proceedings of the International Conference on Science and Education and Technology 2018 (ISET 2018), Semarang, Indonesia. https://doi.org/10.2991/iset-18.2018.96

Sutopo, S., Setiadi, B. R., Nashir, I. M., Saputri, V. H. L., Arifin, A., Prasetya, T. A., Harjanto, C. T., & Sasongko, B. T. (2024). CNC Learning Innovation: Improving Students’ Self-Efficacy and Creativity through Peer-PBL. Jurnal Pendidikan Vokasi, 14(2). https://doi.org/10.21831/jpv.v14i2.72409

Svari, N. M. F. D., & Arlinayanti, K. D. (2024). Perubahan Paradigma Pendidikan Melalui Pemanfaatan Teknologi di Era Global. Metta : Jurnal Ilmu Multidisiplin, 4(3), 50–63. https://doi.org/10.37329/metta.v4i3.3407

Țîțu, A. M., & Pop, A. B. (2024). Implementation of CAD/CAM/CAE Systems for Improved Design and Manufacturing Processes in Industrial Organizations. Proceedings of the International Conference on Business Excellence, 18(1), 3069–3078. https://doi.org/10.2478/picbe-2024-0253

Tsuei, M., & Lai, R.-T. (2015). Development of an Online Engineering Drawing Systemto Enhance Junior High School Students’ Learning in an Engineering Graphics Course. International Journal of Engineering Education, 31(2), 589–596.

Widiansyah, A. (2018). Peranan Sumber Daya Pendidikan sebagai Faktor Penentu dalam Manajemen Sistem Pendidikan. 18(2), 229–234. https://doi.org/10.31294/JC.V18I2.4347

Xiang, Z., Jinghao, X., & Nazarov, Y. (2023). Application of computer-aided design method to optimize the modeling and design stages for industrial products. Revista Gestão & Tecnologia, 23, 38–52. https://doi.org/10.20397/2177-6652/2023.v23i1.2576

Zeky, M. (2022). Pengembangan Manusia Sebagai Sumber Belajar Pada Berbagai Jenjang Pendidikan. ADDABANA: Jurnal Pendidikan Agama Islam, 5(1), 67–80. https://doi.org/10.47732/adb.v5i1.199




DOI: http://dx.doi.org/10.23960%2F33332

Refbacks

  • There are currently no refbacks.


Jurnal Pendidikan Teknologi Informasi dan Vokasional

Diterbitkan oleh:

PROGRAM STUDI PENDIDIKAN TEKNOLOGI INFORMASI
FAKULTAS KEGURUAN DAN ILMU PENDIDIKAN
UNIVERSITAS LAMPUNG

 

Jl. Prof. Dr. Sumantri Brojonegoro No.1Kota Bandar Lampung
Homepage: http://pti.fkip.unila.ac.id
email: pti@fkip.unila.ac.id